Built-in md player, Playing an md 28, Playing an md – Pioneer FH-P9200MP User Manual

Page 28

Advertising
background image

Playing an MD

1

2

3 4

5

FORM1

These are the basic steps necessary to play an

MD with your built-in MD player. More ad-

vanced MD operation is explained starting on

the next page.

WARNING

Do not use with the front panel left open, after
ejecting an MD. If you do leave it open, it may re-
sult in injury in the event of an accident.

1 MDLP indicator (×2or ×4)

Shows when an MD featuring long record-

ing is playing.

2 Group number indicator

Shows the group currently playing.

3 Track number indicator

Shows the track currently playing.

4 GRP indicator

Shows when a group-recorded MD is play-

ing.

5 Play time indicator

Shows the elapsed playing time of the cur-

rent track.

1 Press MD EJECT.

MD loading slot appears.

# After an MD has been inserted, rotate
SOURCE to select the built-in MD player.

2Insert an MD into the MD loading slot.

Front panel is closed automatically, and play-

back will start.

MD loading slot

# You can eject an MD by pressing MD EJECT.

3 Use VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

4 When playing a group-recorded MD,

press a or b to select a group.

5 To perform fast forward or reverse,

press and hold c or d.

6 To skip back or forward to another

track, press c or d.

Pressing d skips to the start of the next track.

Pressing c once skips to the start of the cur-

rent track. Pressing again will skip to the pre-

vious track.

Notes

! Do not insert anything other than an MD into

the MD loading slot.

! An MD left partially inserted after ejection

may incur damage or fall out.

! Load an MD after confirming the MD shutter

(refer to MD player and care on page 69) is
closed.

! When you load a disc, this unit reads informa-

tion recorded on the disc such as the number
of tracks. While the disc is being read,
TOC read is indicated in the display.

! If the built-in MD player does not operate

properly, an error message such as ERROR-11
may be displayed. Refer to Understanding
built-in MD player error messages on page 65.

Built-in MD Player

En

28

Section

07

Advertising