Panasonic PV-D4761 - Manual (Page 21)

21 [email protected]
Insert a tape with a record tab (p. 6). 1
• DECK power comes on.
The VCR mode and “VCR” Indicator light up
on Multi Function Display.
5
4
2
3
Press CH / , or NUMBER keys
to select the channel.
• For “LINE” input, see p. 39.
• If channels is over 100, press 100 key then press
the remaining 2 digits.
Press SPEED
to select the record speed (p. 6).
SP = Standard Play LP = Long Play
SLP = Super Long Play
Press REC
to start recording.
(The VCR REC Indicator lights up on Multi Function
Display),
• To edit out unwanted scenes, press PAUSE/STILL
to pause, and again to resume recording.
Press STOP
to stop recording.
• It is not possible to record from DVD/ Video CD/
CD to VHS tape using DECK.
• Watching one channel and recording another
is not possible when using Cable Box or
DSS Receiver.
• After 5 minutes in Pause mode, DECK stops to
protect a tape and video heads.
One Touch Recording (recording in progress),
--> Press REC repeatedly to set the recording length
(30 min. ~ 4 hours).
• DECK shuts off after the preset record length.
Record one station, watch another,
--> press VCR/TV
(“VCR” goes out on Multi Function Display),
--> select channels at TV (recording continues).
Select channels at DECK,
--> press VCR/TV
(“VCR” lights up on Multi Function Display),
--> select channels at DECK.
Play a disc while recording a tape.
--> insert a disc during recording,
--> press
DVD , and then press PLAY .
• Speed appears on-screen and on Multi Function Display.
• You cannot view another channel during recording.
Basic
Operation
Notes
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Record on a Tape
Note
Remove loose or peeling
labels from tapes
to prevent tape jam.
Multi Function Display
Record using DECK buttons
4
2 Select
Channel.
VCR/TV
Press REC
to start
Recording.
Press STOP/EJECT to stop.
This video recorder, equipped with HQ
(High Quality) system, is compatible
with existing VHS equipment. Only use
tapes with the
mark. Only tapes
tested and inspected for use in 2, 4, 6,
and 8 hour machines are
recommended.
Normal Rec 0:30 1:00
1:30 2:00 3:00 4:00
1 Insert a tape.