Panasonic PV-D4761 - Manual (Page 31)

31 [email protected]
Audio Mode for Recording
1
2
Do a recording.
See p. 21. 3
Audio Mode for Playback
Start playback.
See p. 20.
• Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereo
tapes will playback in monaural sound.
• To listen to Hi-Fi stereo playback, the DECK AUDIO (L/R) jacks must be connected to
a stereo TV or an external stereo amplifier and speakers. (See pp. 12, 14, 15.)
• If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
• Hi-Fi and normal audio playback volume level may differ.
• Arrow indicates
selection.
• Refer to “Receivable Broadcast Types” on p. 30.
• Arrow indicates selection.
• Select “HIFI (L/R)” or “HIFI (L)” or “HIFI (R)” to listen to stereo
recordings in stereo sound.
Select “NORMAL” for monaural sound.
• Display disappears after 5 seconds.
1
2
Press AUDIO
to display audio mode.
(Display disappears after 5 seconds.)
Press AUDIO repeatedly
to select desired mode.
Press AUDIO
to display audio mode.
Press AUDIO repeatedly
to select desired mode.
H I F I ( L / R )
H I F I ( L )
H I F I ( R )
NORMAL
STEREO
SAP
MONO
3
Notes
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
VCR
Operation