Panasonic PV-D4761 - Manual (Page 26)

26 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
1
In order for VCR to read PlusCode numbers, some setup is required. Guide channel numbers
are assigned to each local broadcast and cable station.
Because this number sometimes differs from the channel your TV receives the station on, it is
necessary to program the VCR with local channel information.
To receive VCR Plus+ channels automatically, perform the steps below.
Or, see “Manual VCR Plus+ System Channel Setup” section on p. 28.
Important Note
• “Initial Setup” on pp. 16, 17 must be
completed before “Auto VCR Plus+
System Channel Setup” can be done.
If any part of setup is incomplete,
a warning screen appears.
• When Auto Set is performed, channels
set in initial setup (pp. 16, 17) will be
replaced by automatically downloaded
data.
• Make each entry within 5 minutes,
or VCR will leave this mode.
• Once local channels have been
programmed, they will stay in memory,
even in the case of a power failure.
• If the start time for Timer Recording
comes up during Auto VCR Plus+
System Channel Setup, the Timer
Recording will have priority.
Notes
VCR Plus+ System is ...
a feature that allows you to set most
items of Timer Recording by simply
entering a special code number
(PlusCode programming number)
found in TV GUIDE and selected
newspaper TV listings.
2
3
4
5
6
7
Auto VCR Plus+ System Channel Setup (Part 1)
Press ACTION*
to display menu.
Press
to select “SET UP
CHANNEL” and
press SET.
Press
to select
“VCR Plus+ CH SET UP”
and
press SET to display.
• Make sure to leave
VCR off (overnight).
Press ACTION
to end.
Press
to select When to
Update and
press SET.
Press
to enter “ZIP CODE” and
enter each number.
Press SET or ACTION
to set.
Press
to select “AUTO SET”
and
press SET.
Timer Recording Using VCR Plus+ System
ACTION
SET
SELECT
SELECT :
EXIT : ACTION SET:SET
MENU
SET UP DVD
SET UP VCR
SET CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
SELECT :
EXIT : ACTION SET : SET
MENU
SET UP DVD
SET UP VCR
SET CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
ANTENNA : CABLE
AUTO SET
WEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
SELECT : SET : SET
EXIT : ACT I ON
SET UP CHANNEL
AUTO SET
MANUAL
SELECT : SET : SET
EXIT : ACT I ON
VCR Plus+ CH SET UP
PLEASE ENTER Z I P CODE
Z I P CODE : -----
SELECT :
SET : SET
END : ACT I ON
VCR Plus+ CH SET UP
SELECT :
SET : SET
EXIT : ACT I ON
PLEASE SELECT HOW OFTEN
TO UPDATE
R I GHT NOW
EVERY NIGHT
EVERY MONDAY NIGHT
END : ACT I ON
PLEASE LEAVE VCR OFF
(OVERNIGHT)
VCR Plus+ CH SET UP