Panasonic PV-D4761 - Manual (Page 38)

38 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
DETECTING TAPE POSITION
Special VCR Features (continued)
INPUT
ACTION
SET
TAPE
POSITION
SELECT
Weak Signal Display ON/OFF Feature Tape Position and Tape Status Feature
Note
To find out the present tape position and amount of tape remaining.
Tape position cannot be detected for VHS-C Cassettes,
tapes under 30 minutes, and some other tapes.
Press TAPE POSITION
to detect current tape position.
• “DETECTING TAPE POSITION” is displayed only when
a cassette is first inserted, and it takes several seconds
for correct tape position to appear.
• The present tape position indication and amount of tape
remaining (according to tape speed) is displayed.
• Tape remaining time display may not be precise.
• This function cannot display exact amount of tape remaining for tapes 30 minutes
or less, or for tapes over 120 minutes in length.
If Multi-brand feature is used (p. 32), and this feature is
set to on, a warning appears whenever an invalid key is
pressed in TV, DSS or CABLE mode.
4
3
1
• If “OFF,” remote warning will not appear
when invalid key is pressed.
Press ACTION*
to display MENU.
Press
to select
“REMOTE WARNING,” and
press SET
to set “ON” or “OFF.”
Press ACTION twice
to return to normal screen.
Remote Warning Feature
2 Press
to select “SET UP VCR,”
and
press SET.
1
SELECT :
EXIT : ACTION SET : SET
MENU
SET UP DVD
SET UP VCR
SET CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
REPEAT PLAY : OFF
RE REMOTE OTE WARN ARN I NG NG : ON
AUTO SHUT-OFF : ON
SELECT : SET: SET
EXIT : ACT I ON
SET UP VCR
BEG I N END
SP
R 70 MIN.
*Important: If a remote control button does not work
when pressed, press the VCR button
on the remote and try the button again.
PAUSE/
STILL
STOP
REC