Set user session, Show default user, Show user – Perle Systems 5500208-43 User Manual
Page 35
36
Configuring Users
Set User Session
Description Configures a users session settings. See
for the options
descriptions.
User Level Admin
Syntax
Show Default User
Description Shows the Default Users settings. When adding a new user, the profile of the default
user will be used to assign the values of the parameters to the new user.
User Level Admin
Syntax
Show User
Description Shows user configuration settings.
User Level Admin
Syntax
Options
<configured_user>
Show the settings for the specified user.
.
Show the settings for the current user.
set user .|<username> session 1|2|3|4|* [auto on|off]
[type off|telnet]
set user .|<username> session 1|2|3|4|* telnet-options
[host <config_host>] [port <TCP_port>]
[termtype <terminal_name>] [line-mode on|off]
[map-cr-crlf on|off] [local-echo on|off]
[echo <00-7f>] [eof <00-7f>] [erase <00-7f>] [intr <00-7f>]
[quit <00-7f>]
show default user
show user <configured_user>|.