Perle Systems 5500208-43 - Manual (Page 39)

40
Line Commands
keepalive
Enables a per-connection TCP keepalive feature. After the configured number of
seconds, the connection will send a gratuitous ACK to the network peer, thus either
ensuring the connection stays active OR causing a dropped connection condition to be
recognized.
This parameter needs to be used in conjunction with server parameter,
monitor-connection-every. The interval determines how long the IOLAN will wait
during inactivity before "testing" the connection. It should be noted that if a network
connection is accidentally dropped, it can take as long as the specified interval before
anyone can reconnect to the serial port.
line-name
Provide a name for the line so it can be easily identified.
lock
When enabled, the user can lock his terminal with a password using the Hotkey Prefix
(default Ctrl-a) ^a l (lowercase L). The IOLAN prompts the user for a password and a
confirmation.
mode
Enables/disables the line (available only on the TS2 model). The default is enabled.
modem-name
The name of the predefined modem that is used on this line.
motd
Enables/disables the message of the day on the line.
nouser
Blanks out the User parameter, in case you want to change a dedicated user line to an
undedicated line.
pages
For DSLogin line service, this is the number of video pages the terminal supports. Valid
values are 1-7. The default is 5 pages.
parity
Specifies if you are using Even , Odd , or No parity on the line. If you want to force a
parity type, you can specify Mark for 1or Space for 0.
phone-number
The phone number to use when Connection Method is set to Dial Out .
reset
Resets the terminal type connected to the line when a user logs out.
rev-sess-security
Enables/disables login/password authentication, locally or externally, on reverse Telnet
connections. The default is
Off .
send-name
When enabled, the port name will be sent to the host upon session initiation
.
Default: Disabled