Paradyne 6800 User Manual
Page 161
Advertising
Connecting the Components
4-57
6800-A2-GN22-30
January 1997
Connecting the UIP to the Bytex UMS
To connect a UIP to the Bytex UMS, perform the following steps:
1. Connect the grounded end of the 035-0153-0031 cable to a port on the IPC-1600 card.
2. Connect the other end of the 035-0153-0031 cable to the 002-0039-0031 ACU/MODEM
adapter.
3. Connect the 002-0039-0031 ACU/MODEM adapter to a port on the Bytex UMS.
NOTE
The connection to the UIP must be used only for cut-through.
Advertising