Paradyne 6800 - Manual (Page 40)

Preparing the Processors
2-17 6800-A2-GN22-30 January 1997
Installing the Octopus Cable Assembly
Every host system contains an Emulex DCP/MUXi card. If the 16 Control Channel Package is
installed, two Emulex DCP/MUXi cards are present. An external octopus cable assembly must be
attached to the card at the customer site. Attach the 50-pin connector of the octopus cable to the
connector on the back of the DCP/MUXi card and lock into place. Figure 2-10 shows the
DCP/MUXi and the octopus cable assembly.
Figure 2-10. Emulex DCP/MUCi — Circuit Card and Cable Assembly