Paradyne 6800 - Manual (Page 226)

Loading and Restoring Software
5-65 6800-A2-GN22-30 January 1997
16. The system responds:
Settings saved the file “C:\/XONE\/hardware.cfg”.
Press any key to continue
PRESS: Enter
17. The system prompts:
Xsetup will need to copy the graphics driver ‘vga256.dvr’
from the X-One diskette to the C:\/XONE directory.
Insert the disk labeled ‘Install’ in drive A:
Press ENTER to continue or ‘q’ to Quit
18. Insert the proper disk and
PRESS: Enter
19. The system responds:
1 file extracted from archive
Press any key to continue
PRESS: Enter
20. The system prompts:
Select Network configuration
1. Grafpoint’s own builtin TCP/IP
2. Beame and Whiteside BW-TCP
3. FTP Software’s PC/TCP version 2.05
4. FTP Software’s PC/TCP version 2.1 or later
5. Sun Microsystem’s PC/NFS ver’s 3.5-3.9
6. Sun Microsystem’s PC/NFS ver. 4.0 or later
7. Woolongong’s Pathway TCP
Enter Selection or ‘q’ to Quit [1]:
PRESS: Enter
21. The system then prompts:
Select Network Interface
.
.
.
4. 3COM 3C503 (Etherlink II)
Enter selection or ‘q’ to Quit:
TYPE: 4
PRESS: Enter