Paradyne 6800 User Manual

Page 55

Advertising
background image

COMSPHERE 6800 Series Network Management System

2-32

January 1997

6800-A2-GN22-30

494-14500-01

Figure 2-15. System 15000 — Removing the Top Cover

2. Slide the right-hand side cover upwards about 1

I and swing the cover outwards pivoting

on the rear edge, as shown in Figure 2-16.

3. Disengage the rear edge of the right side cover and lift it from the chassis and set it aside.

4. Remove the left side cover by lifting it by the fingerhold built into the top portion of the

cover and set the cover aside.

5. Open the door on left front of the chassis and remove the two Phillips-head screws just

inside the hinge (see Figure 2-17). Save the screws for later.

6. Disengage the door spring from the pin on the lower pivot of the door hinge.

7. Remove the left side cover by lifting it by the fingerhold built into the top portion of the

cover and set the cover aside.

Advertising