P116), Applicable modes – Panasonic DMC-G5 User Manual
Page 116
- 116 -
Recording
Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
•
The exposure meter is displayed, and the aperture and shutter speed are changed to give a
suitable exposure. Which items of the settings change will depend on the Recording Mode.
•
In the following cases, suitable exposure cannot be set. (Exposure meter is displayed)
–
When the subject is extremely dark and it is not possible to achieve adequate exposure by
changing the aperture value or shutter speed
–
When recording using the flash
–
In Preview Mode
–
When using a lens that includes an aperture ring
Note
•
In Program AE Mode, you can cancel program shift by pressing function button.
Easily set aperture/shutter speed for suitable exposure (One Push AE)
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red
A when the shutter
button is pressed halfway.
•
If the Manual Exposure Assistance is anything other than
when
in Manual Exposure mode. For more details on Manual Exposure
Assistance, refer to
.
1
Set the [Fn Button Set] of the [Custom] menu to [One Push AE].
•
This is the procedure for setting [Fn1].
2
(When exposure is not adequate) Press [Fn1].
Recording
Mode
Settings that change
Aperture value
Shutter speed
Aperture value/Shutter speed
16
4000
4000
4000
3.5
3.5
3.5
0
0
-3
-3
A
16
0
SS
SS
SS
F
15
250
4.0
5.6
8.0
125
60
30
60
60
60
3.5
0
16
0
4000
4000
4000
3.5
3.5
3.5
0
0
-3
-3