P77) – Panasonic DMC-G5 User Manual
Page 77
- 77 -
Basic
•
Imaging device and image processing is optimized when the camera is purchased. Use this function
when bright spots that do not exist in the subject get recorded.
•
Turn the camera off and on after the pixels are corrected.
•
Dust Reduction Function will operate automatically when the camera is turned on, but you can use
this function when you see dust.
•
Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not turn
the camera off during formatting.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
If the card cannot be formatted, please try another card before contacting your nearest Service
Center.
[Pixel Refresh]
It will perform optimisation of imaging device and image processing.
[Sensor Cleaning]
Dust reduction to blow off the debris and dust that have affixed to the
front of the imaging device is performed.
[Format]
The card is formatted.
Formatting permanently deletes all data on your memory card.
Please be sure all pictures and motion pictures are saved
elsewhere before using this feature.
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: [email protected]
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo