Panasonic DMC-G5 - Manual (Page 169)

- 169 -
Recording
[Power Zoom Lens]
This may only be selected when using a lens that is compatible with
power zoom (electrically operated zoom).
– The interchangeable lens (H-PS14042) is compatible with power zoom.
– The interchangeable lenses (H-FS014042, H-FS45150) are not
compatible with power zoom.
(For compatible lenses, please refer to our website.)
[Disp Focal Length]:
When you zoom, the focal distance is
displayed and you can confirm the zoom
position.
A Current focal distance
[ON]/[OFF]
[e.g.: When the
interchangeable lens
(H-PS14042) is used]
[Step Zoom]:
When you operate the zoom with this setting
[ON], the zoom will stop at positions
corresponding to predetermined distances.
•
[Step Zoom] is disabled during motion picture
recording.
[ON]/[OFF]
[e.g.: When the
interchangeable lens
(H-PS14042) is used]
[Zoom Resume]:
When you turn this unit on, the zoom positions when you last turned
this unit off are automatically restored.
[ON]/[OFF]
[Zoom Speed]:
You can set the zoom speed for zoom operations.
•
If you set [Step Zoom] to [ON], the zoom speed will not change.
[Photo]:
[H] (High speed), [M] (Middle speed), [L] (Low speed)
[Video]:
[H] (High speed), [M] (Middle speed), [L] (Low speed)
[Zoom Ring]:
This may only be selected when a power zoom-compatible lens with a
zoom lever and zoom ring is attached. When set to [OFF], the
operations controlled by the zoom ring are disabled to prevent
accidental operation.
[ON]/[OFF]
A