Compensating the exposure, P88) – Panasonic DMC-G5 User Manual
Page 88
- 88 -
Recording
Compensating the Exposure
Applicable modes:
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.
•
The Exposure Compensation value can be set within a range of
j5 EV to i5 EV. When
recording motion pictures, the Exposure Compensation value can be set within a range of
j3 EV to i3 EV.
•
Select [0] to return to the original exposure.
•
Rotate the rear dial to display the [Expo.Meter].
Note
•
To compensate the exposure using the function lever, set [Function Lever]
in the [Custom]
menu to [EXP.].
•
When the exposure value is out of the
j3 EV to i3 EV range, the brightness of the recording
screen will no longer change. It is recommended to record by checking the actual brightness of the
recorded image in the Auto Review or playback screen.
•
The set exposure value is memorized even if the camera is turned off.
•
The compensation range of the exposure will be limited depending on the brightness of the subject.
•
When the aperture and shutter speed values are displayed in the screen in the Program AE Mode,
Program Shift operation and Exposure Compensation operation is switched every time the rear dial
is pressed.
•
In the Aperture-Priority AE Mode, Aperture Setting operation
operation is switched every time the rear dial is pressed.
•
In the Shutter-Priority AE Mode, Shutter Speed Setting operation
and Exposure
Compensation operation is switched every time the rear dial is pressed.
1
Press the rear dial to switch to Exposure
Compensation operation.
2
Rotate the rear dial to compensate the exposure.
A Exposure Compensation value
B [Expo.Meter]
Underexposed
Properly
exposed
Overexposed
Compensate the exposure
towards positive.
Compensate the exposure
towards negative.
16
0
SS
SS
F
250
15
4.0
5.6
8.0
30
60
125
5
0
5
0
A
B