P230) – Panasonic DMC-G5 User Manual
Page 230
- 230 -
Others
•
Pictures cannot be printed using a printer that does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB Mode].
> When using a printer with a Cropping or borderless printing function, cancel this function before
printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be
printed.
•
This is the noise of the Dust Reduction Function working
; it is not a malfunction.
•
It is a sound of lens movement or aperture operation when this unit is turned on or off, and it is not a
malfunction.
•
You may hear a sound from the lens and image in the LCD monitor may suddenly change when the
brightness has changed by zoom operation or moving the camera, but there is no effect on
recording.
The sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
> Press [MENU/SET], select the [Setup] menu icon [ ] and then select the [~] icon to set the
desired language.
•
This is a highlight function showing the white saturated area.
•
In dark places, the AF Assist Lamp
lights red to make it easier to focus on a subject.
•
Is [AF Assist Lamp] set to [ON]?
•
The AF Assist Lamp does not turn on in bright places.
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
Others
The camera makes a noise when this unit is turned on.
There is a sound from lens unit.
An unreadable language was selected by mistake.
Part of the picture is flashing in black and white.
A red lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.