Panasonic DMC-G5 User Manual
Page 226
- 226 -
Others
•
The LCD monitor turns off when [Auto LCD Off]
is selected for the [Economy] Mode.
[This does not happen when using the AC adaptor (optional).]
•
It will switch to viewfinder display if there is hand or object near the eye sensor.
•
Check [LCD Mode] setting.
•
Perform [LCD Display]/[Viewfinder].
•
This occurs due to the aperture of the lens changing when the shutter button is pressed halfway, or
when the brightness of the subject changes. This is not a malfunction.
•
Does the picture appear on the viewfinder?
> Press [LVF/LCD] to switch to LCD monitor display.
•
Is the LCD monitor switched off?
> Switch the display by pressing [DISP.].
•
It is only displayed on the LCD monitor when the camera is connected to a PC or printer.
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
•
In dark places, noise may appear to maintain the brightness of the LCD monitor.
•
This is a characteristic of the drive system of the viewfinder of this unit, and it is not a malfunction.
There will be no problem with the recorded image.
LCD monitor/Viewfinder
The LCD monitor turns off although the camera is turned on.
The LCD monitor/Viewfinder is too bright or dark.
It may flicker for an instant or the brightness of the screen may change significantly for an
instant.
The picture is not displayed on the LCD monitor.
LCD monitor and viewfinder do not switch when [LVF/LCD] is pressed.
Black, red, blue and green dots appear on the LCD monitor.
Noise appears on the LCD monitor.
You see red, green, or blue flashes when you move your eyes in the viewfinder, or
when the camera is moved rapidly.