Pioneer RCS-606H - Manual (Page 125)

The Video Adjust menu 14
125
En
English
Chapter 14
The Video Adjust menu
Using the Video Adjust menu you can set up the picture
quality for the built-in tuner and external inputs, for disc
playback, and for recording.
Setting the picture quality for TV and
external inputs
Picture Creation lets you choose a set of picture quality
settings for the built-in TV tuner and for each external
input. There are several preset settings that suit various
sources, or you can create up to three of your own sets.
Choosing a preset
1 With the recorder stopped, press to
display the Home Menu.
2 Select ‘Video Adjust’.
3 Select a preset.
• Use the VIDEO IN button to switch between the built-
in TV tuner and the external inputs.
• Use the / buttons to change the channel of
the built-in TV tuner.
There are six presets available:
• Tuner – suitable for general TV broadcasts
• VCR – suitable for video cassettes
• DTV/LDP – suitable for digital broadcasts and
Laserdiscs
• Memory1 – user preset 1
• Memory2 – user preset 2
• Memory3 – user preset 3
You can press DISPLAY to see the individual settings for
the current preset ( Tuner, VCR or DTV/LDP).
Creating your own set
There are three user presets in which you can save your
own set of picture quality settings.
1 Follow Choosing a preset above and select one of
the user presets (Memory 1, 2 or 3).
2 Select ‘Detailed Settings’.
3 Select the setting you want to adjust.
You can adjust the following settings:
• Prog. Motion – Adjusts the motion and still picture
quality when video output is set to progressive.
• PureCinema – This setting optimizes the picture for
film material when the video output is set to
progressive. Usually this is best left set to
Auto; try
switching to Off if the picture appears unnatural.
• 3-D Y/C – Adjusts the brightness / colour separation
(NTSC video input only).
• YNR – Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
• CNR – Adjusts the amount of noise reduction (NR)
applied to the C (colour) component.
• White AGC – Turn on for automatic white level
adjustment.
1
• White Level – Adjusts the intensity of white.
• Black Level – Adjusts the intensity of black.
• Black Setup – Corrects the standard reference black
level (NTSC video input only).
HOME MENU
ENTER
ENTER
Detailed Settings
Pr 1
Tuner
Note
1 When White AGC is On, the White Level setting can’t be adjusted.
ENTER
Detailed Settings
Pr 1
Memory1
ENTER
Memory1
3-D Y/C
Motion Still
PureCinma
Prog. Motion
Auto1
Motion Still
Pr 1
White Level
CNR
YNR
White AGC Off
Max
Off
Off
Max
Max Min