Pioneer RCS-606H - Manual (Page 80)

Recording 06
80
En
• The timer indicator ( ) lights in the front panel
display when the timer is active. If the indicator is
blinking it means that (for a DVD timer recording)
there is no disc loaded, or the disc loaded is not
recordable (for an HDD timer recording it means that
the HDD is not recordable).
• Approximately two minutes before a timer recording
is set to start, the recorder will go into timer recording
standby. In timer recording standby you cannot use
some functions.
• The maximum length for timer recordings made to
the HDD is 24 hours. However, because one title
(HDD) is limited to 12 hours, recordings over 12
hours will be spread over two titles. Note that there
will be a break in the recording of a few seconds
between titles.
• VPS/PDC may not work with all broadcast stations in
your country/area. Check with the stations for
compatibility.
• The hours between 3:00 and 5:00 in the morning are
used by the GUIDE Plus+ system to download
program information. During these times, VPS/PDC
may not work reliably; leave VPS/PDC off if you set a
timer recording for these times.
Easy Timer Recording
As the name suggests, Easy Timer Recording makes
setting up a timer recording as simple as possible.
1
1 Select ‘Easy Timer’ from the Home
Menu.
2 Set the TV channel to record.
3 Set the recording quality.
• DVD recording: The AUTO option automatically sets
the best recording quality for the space available on
the disc loaded at the time of recording.
• HDD recording: The AUTO option automatically sets
the best recording quality that would fit on to a blank
DVD disc.
4 Select the HDD or DVD for recording.
5 Move the cursor to the recording start
date and time on the grid.
• You can move the cursor forward or back an hour at
a time using the and buttons.
Each row of the grid is one day (you can set the timer
recording for up to a month in advance). Each column is
a 15 minute interval.
The darker area represents time that has already passed
and can’t therefore be selected. The lighter area is time
that’s available.
Note
1.You can’t use VPS/PDC with Easy Timer Recording. Set a scheduled recording using the GUIDE Plus+ system if you want to use VPS/PDC.
HOME MENU
PREV NEXT
Easy Timer Recording
Pr 7
SAT
1/01 9:30
HDD HDD/DVD SP REC MODE
8:00 9:00 10:00 11:00 12:00 13:00 14:00
– ––:––
1/01
2/01
3/01
REC MODE
HDD/DVD
ENTER
Easy Timer Recording
Pr 7
SAT
1/01 11:45
HDD HDD/DVD SP REC MODE
8:00 9:00 10:00 11:00 12:00 13:00 14:00
– ––:––
1/01
2/01
3/01
Current time
Recording start time