Pioneer RCS-606H - Manual (Page 72)

Using the GUIDE Plus+™ electronic program guide 05
72
En
Switching a channel on/off
You can choose whether or not to display a channel in the
Grid Area by switching the channel on or off in the Editor
Area.
1 Select ‘Editor’ from the Menu bar.
2 Highlight the left channel tile of the channel you
want to switch on or off.
3 Press the RED Action button to switch the
channel on or off.
Changing the source and program number
1 Select ‘Editor’ from the Menu bar.
2 Highlight the right channel tile of the channel
you want to make a change to.
3 Press the RED Action button to change the
channel source, or the GREEN Action button to enter
a program number.
Each press of the
RED Action button changes the
channel source ( Tuner, Ext. Rec. 1, etc.). To set a
program number, use the number buttons to enter a
program number then press
ENTER . (When set to Tuner,
make sure that the program number matches the preset
number of this recorder for what you want to record).
The Setup Area
The Setup Area is where you can set up the GUIDE Plus+
system for your particular region, TV reception
conditions, and so on.
Making changes to your GUIDE Plus+ setup
1 Select ‘Setup’ from the Menu bar.
2 Highlight the part you want to change.
You can change the Language, Country, Postal Code
1
and the External Receiver settings.
3 Press ENTER to confirm.
Note
1 Making changes to the Country or Postal Code settings may require a new download of TV listings information. This can take up to 24 hours.
Press ENTER to access the Basic Setup screen.
Basic Setup
Host Channel Setup
GUIDE Plus+ System Information