Pioneer RCS-606H - Manual (Page 142)

Additional information 16
142
En
If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the
outlet and insert again to return to normal operating conditions.
Can’t use One Touch Copy
(HDD to DVD) • Make sure that there is a recordable DVD-R/-RW loaded with some free space for
recording and fewer than 99 titles already on the disc. Also make sure that for a Video
mode disc or a DVD+R, the disc isn’t finalized.
• Make sure there is a recordable DVD+R/+RW loaded with some free space for
recording and fewer than 49 titles already on the disc.
• If you delete a title from a DVD+R/+RW disc, the number of remaining recordable titles
may not decrease.
• Further recording is not possible on a finalized DVD+R. Check that there isn’t a disc
menu on the disc you’re trying to use.
• If the title currently playing contains material that is copy-once protected, One Touch
Copy will not work.
• One Touch Copy can’t be used for titles over 8 hours long when copying to DVD+R/
+RW (though you can use a DVD+R DL).
• One Touch Copy can’t be used for
MN1 to MN6, SEP, SLP or EP titles when copying to
DVD+R/+RW.
• One Touch Copy doesn’t work if the recorder is already recording to DVD.
Can’t use One Touch Copy
(DVD to HDD) • Make sure that there is space available on the HDD and that there are fewer than 999
titles on the HDD.
• One Touch Copy doesn’t work if the recorder is already recording to the HDD.
The picture freezes and the
front panel and remote
control buttons stop
working • Press STOP then try restarting playback.
• Press the front panel STANDBY/ON button to switch the power off, then switch back
on and restart playback. If the power fails to switch off, press and hold STANDBY/ON
for 5 seconds until the power switches off.
A device connected via USB
does to function. • Check that it is a device that may be connected to this unit (digital camera, USB
memory, memory card reader or printer).
• Use a USB cable less than 5 m in length.
• Check that the USB cable is inserted fully.
• Check that the USB device is powered on.
• Only the first digital camera, USB memory or memory card reader connected is
readable by this unit. Unplug multiple devices and connect the device you want to use
first.
Problem Remedy