Procom VOR/ILS Analyzer EVS200 - Manual (Page 31)

VOR/ILS Analyzer EVS200
0796.1800.02 E-8 22
Chapter 3: Operation
Signal parameters on VOR display
Following signal parameters are indicated on the display:
display indication description measuring value
FREQ. (MHZ) receiver frequency in MHz (numerical) and
bargraph center frequency indication in kHz MHz
LEVEL (dBm) receiver signal in dBm (numerical) and
bargraph indication (the lower bargraph
shows the set squelch threshold) dBm
DISPL 1/2 BEARING BEARING angle DEG
AM-MOD.(30HZ) AM modulation depth (30 Hz) %
AM-MOD.(9960HZ) AM modulation depth (9960 Hz) %
FM-DEVIATION frequency deviation Hz
FM-INDEX FM index value index value
(non-dimension value)
DISPL 2/2 ID AF-FREQ. AF frequency (1020 Hz) Hz
ID AM-MOD. AM modulation depth of AF frequency %
VOICE AM-MOD. AM modulation depth in the range of
300 to 3000 Hz %