Procom VOR/ILS Analyzer EVS200 User Manual
Page 51
VOR/ILS Analyzer EVS200
0796.1800.02
E-8
42
Chapter 3: Operation
Command FA0
command
function
FA0
<fast DDM measuring off>
deactivating the fast DDM measurement
The command FA0 switches off the fast DDM measurement.
Example:
command from the controller
response of the VOR/ILS Analyzer EVS200
input:
FA0 <CR>
fa0 <CR>
READY <CR/LF>
READY <CR/LF>
Command D1
command
function
D1
<display information>
switch over to display1
The command D1 enables the switching over to the content of display1 in the VOR / ILS mode.
This is prediction for reading out the data of the corresponding mode (VOR/ILS).
Example:
command from the controller
response of the VOR/ILS Analyzer EVS200
input:
D1 <CR>
d1 <CR>
READY <CR/LF>
READY <CR/LF>
Command D2
command
function
D2
<display information>
switch over to display2
The command D2 enables the switching over to the content of display2 in the VOR / ILS mode.
This is prediction for reading out the data of the corresponding mode (VOR/ILS).
Example:
command from the controller
response of the VOR/ILS Analyzer EVS200
input:
D2 <CR>
d2 <CR>
READY <CR/LF>
READY <CR/LF>