Procom VOR/ILS Analyzer EVS200 User Manual
Page 43
VOR/ILS Analyzer EVS200
0796.1800.02
E-8
34
Chapter 3: Operation
Command VER
command
function
VER
<Version>
query of version number and date of the
EVS200 firmware
The command VER initializes the display of the software version number and its issue date.
Example:
command from the controller
response of the VOR/ILS Analyzer EVS200
query:
VER <CR>
ver <CR>
EVS200 - VERSION < No. > from < Date >
Copyright (C) Rohde & Schwarz Werk Köln
<CR/LF>
Command ML
command
function
ML
<Mode-Delta Level>
∆∆∆∆
level mode setting
The command ML enables a switching over to the "
∆∆∆∆
level" mode.
Exampel
:
command from the controller
response of the VOR/ILS Analyzer EVS200
input:
ML <CR>
ml <CR>
READY <CR/LF>
READY <CR/LF>
Command MV
command
function
MV
<Mode-VOR>
VOR mode setting
The command MV enables a switching over to the "VOR“ mode.
Example:
command from the controller
response of the VOR/ILS Analyzer EVS200
input:
MV <CR>
mv <CR>
READY <CR/LF>
READY <CR/LF>