Panasonic MC-CG973 - Manual (Page 13)

- 13 - - 44 -
Overload Tools-
POWER Protector Headlight On-Board Cord Length
120V. AC (60Hz) Yes Yes Yes 24 Ft. (7.3 m)
12.0 A
Protector
contra Extensión
Voltaje subrecargas Luz Herramientas de cordón
120V. AC (60Hz) Si Si Si 7,3 m (24 pi)
12,0 A
Protecteur Dispositif Longueur
Alimentation de surcharge d’éclairage Accessoires du cordon
120 V c.a. (60 Hz) Oui Oui Oui 7,3 m (24 pi)
12,0 A
FEATURE CHART
D Diia ag grra am ma a d de e c ca arra ac ctte erríís sttiic ca as s
Tableau des caractéristiques
TO CHECK BRUSHES:
➢ ➢ When brushes are worn to the level
of the base support bar, replace the
brush dowel.
TO REPLACE AGITATOR
ASSEMBLY
➢ ➢ Remove POWER NOZZLE cover,
belt and agitator assembly. (See
“REMOVING BELT”).
➢ ➢ Replace agitator assembly.
➢ ➢ Replace belt, POWER NOZZLE
cover and screws. (See
“REPLACING BELT”).
Base Support Bars
Barres de support de la base
Barra de soporte de la base
Brush Servicing
AGITATOR ASSEMBLY
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before per-
forming maintenance to the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
vacuum cleaner suddenly starting.
End Cap
End Cap
Belt Pulley
Brush Unit