7 fax – Planet Technology BT-200U User Manual
Page 31
Appendix C - Specifications
27
After the Bluetooth dial-up networking connection is established it can be used the
same way as any other networking connection. For example, you can open a browser
and explore the World Wide Web, if the remote computer has Internet access.
Close a Dial-up Networking connection
l
If the connection was established via the Bluetooth icon in the Windows
system tray; click the Bluetooth icon, select Quick Connect, Dial-up Net-
working and then select the device that is providing the service (active
connections have a checkmark in front of them).
or
l
No matter how the connection was created, In My Bluetooth Places, right-
click the service name and select Disconnect.
Configure
The Bluetooth Configuration Panel > Client Applications > Dial-up Networking > Gen-
eral tab provides options to configure:
l
The application name
—to change it, highlight the existing name and enter
the new name.
l
Enable or disable secure connection. To enable secure connection, place a
checkmark in the box.
l
The Bluetooth virtual device to be used.
?
NOTE:
Unless you have a specific reason to do so, DO NOT CHANGE the
default Bluetooth device or alter the device's configuration.
5.5.7 Fax
Overview
The Bluetooth Fax service allows this computer to send a fax using a Fax/Modem that
is physically connected to a remote device.
To Send a Fax
1. Open a connection to the Fax service that is provided by another Bluetooth device,
using one of these techniques:
l
Windows system tray, Bluetooth icon
l
From My Bluetooth Places
l
Using the Bluetooth Setup Wizard
2. Open or create the document to be faxed and select the
“Print,” “Send to Fax
Recipient
” or similar command that is available in most applications.
Close a Fax Connection
Fax connections close automatically when the Fax transmission is complete.
Configure
The Bluetooth Configuration Panel > Client Applications > Fax > General tab provides
options to configure:
l
The application name
—to change it, highlight the existing name and enter
the new name.