Planet Technology BT-200U - Manual (Page 47)

Appendix C - Specifications
43
l Device status: indicates that the device is operating properly or that
there is a problem/conflict.
l Manufacturer: the name of the company that manufactured the de-
vice selected in the Devices section of this dialog box.
l Firmware Revision: the manufacturer's firmware version number.
l Device Address: the Bluetooth Device Address (BDA or BD_Addr)
assigned to this device when it was manufactured.
l HCI Version: the version number of the Bluetooth Specification that
the
l Host Controller Interface complies with.
l HCI Revision: the revision number of the Bluetooth Specification that
the
l Host Controller Interface complies with.
l LMP Version: the version number of the Bluetooth Specification that
the
l Link Manager Protocol complies with.
l LMP Sub Version: the sub-version number of the Bluetooth Specifi-
cation that the Link Manager Protocol complies with.
l The Advanced button: displays the Advanced Settings dialog box, which al-
lows you to select the country code and transmission power settings. This
option is not available on all systems.
5.7.1 Advanced Settings
When available, this dialog box is reached from the Hardware tab of the Bluetooth
Configuration Panel.
?
NOTE:
Depending on the country in which the hardware is sold and/or in
which it will be used, the Advanced button may not be present.
From this dialog box you can set the:
l Country Code:
l North America, Europe (except France), and Japan
l France and China
l Maximum Transmission Power:
l High
l Medium
l Low.
Click Apply to implement the changes. A dialog box appears with notification that the
Bluetooth device attached to this computer must be reset before the change(s) will
take effect.
Click Yes to reset the Bluetooth device now
—all open Bluetooth connections will be
closed.