Planet Technology BT-200U - Manual (Page 39)

Appendix C - Specifications
35
1. Authentication: a balloon notification (audio optional) appears to prompt for a PIN
code. If the PIN code does not match the code entered on the remote device, the
connection will not be allowed. Once the remote device has been authenticated
this notification will not appear again, unless the paired relationship is broken and
the devices must re-pair.
2. Authorization: a balloon notification appears and/or a sound file provides audio
notification that a remote device is attempting to access a Bluetooth service on this
computer. Click the balloon to proceed. A dialog box appears that offers the option
of letting the connection proceed this time only or to always allow this particular
remote device to use the service it is attempting to access.
3. Once a connection has been authorized, an additional visual and/or audio notifica-
tion may appear (if enabled). This notification is for information only to inform the
operator that a connection has been established.
After two devices are paired (step 1, above), the authentication notification will no
longer appear when a connection is attempted.
If
“Always allow…” is enabled during the authorization process (step 2, above), the
authorization notification will not appear on future connection attempts.
Connection notification (step 3, above) only happens if it has been enabled on the
Notifications tab of the individual service being accessed.
Service Access Notification
“Notifications” lets you associate a sound (Windows *.wav file) and/or a visual indica-
tion with access attempts by remote devices.
A different notification sound can be associated with each local Bluetooth service.
Associate a sound with service access
From the Bluetooth Configuration Panel, Local Services tab:
1. Double-click a service name and then select the Notifications tab.
2. Check the desired options; visual and sound may both be selected for a single
event.
3. Choose a sound; click the Browse button and navigate to the sound file (*.wav) to
be used for notification. To preview the sound file, click the play ( ) button.
4. Click OK to close the service's property dialog box.
5.6.2 Audio Gateway
The Bluetooth Audio Gateway service allows this computer to use a remote Bluetooth
device
’s microphone and speakers as this computer’s input and output devices.
For example, if this computer has voice recognition capabilities, a Bluetooth headset
might be used as the audio input device.
Hardware Requirements
l The Bluetooth radio on both this computer and the remote device must support
audio.
l The remote device handles both audio input and output for this computer;
therefore, this computer does not require a sound card, microphone, or speak-