Planet Technology BT-200U - Manual (Page 51)

Appendix C - Specifications
47
Chapter 6
Security
6.1 AUTHENTICATION
Authentication is used to verify identity; it requires a passkey or link key from the
remote device. When a remote device attempts access, a visual and/or audio warning
notifies the local operator.
If the notification is ignored, access is denied after a preset timeout.
When devices are
“paired,” those devices automatically exchange a link key and
Authentication is carried out without operator intervention.
6.2 AUTHORIZATION
Authorization is Yes-or-No security that requires operator intervention to avoid having
the connection time out and fail.
Authorization is limited to:
l Yes, you may connect (click the balloon to proceed)
l No, you may not connect (ignore the balloon prompt and the connection will
fail).
6.3 BLUETOOTH DEVICE IDENTITY
Every Bluetooth device has a unique Bluetooth Device Address (BDA) assigned to it
during the manufacturing process. This address cannot be changed by the end-user.
A device
’s BDA is usually displayed in hexadecimal format; 00:D0:B7:03:2E:9F is a
valid BDA.
Each Bluetooth device also has an operator-configurable, user-friendly name to help
distinguish it from other devices. The user-friendly name may be up to 99 alphanu-
meric characters in length and may contain spaces. My Personal Computer is a valid
user friendly name.
6.4 ENCRYPTION
Encrypting data translates it into an unreadable format using a secret key or password.
Decrypting the data requires the same key or password that was used to encrypt it.
6.5 LINK KEY
A unique, internally generated, access code based on a passkey, the Bluetooth Device
Address and an internally generated random number. Link keys are generated auto-
matically when devices Pair.
After a link key is generated, manual entry of the passkey is not required.
6