Planet Technology BT-200U - Manual (Page 54)

Broadband Router User Guide
50
The sixth entry contains the Specification Revision information for the Host Controller
Interface, if appropriate.
7.6 DETERMINE THE VERSION OF THE LINK MANAGER
PROTOCOL (LMP)
In the Bluetooth Configuration Panel, on the Hardware tab, in the Device Properties
section, the seventh entry provides Link Manager Protocol version number information.
The eighth entry contains the Link Manager Protocol sub-version number information,
if appropriate.
7.7 FIND INFORMATION ABOUT THE BLUETOOTH
HARDWARE ATTACHED TO MY COMPUTER
In the Bluetooth Configuration Panel, select the Hardware tab.
7.8 INTERNET CONNECTION SHARING DOES NOT
WORK
This occurs because Internet Connection Sharing was enabled when Bluetooth was
installed (this is a Microsoft Windows behavior and is considered proper operation).
To resolve the
“problem”:
1. Disable Sharing for the Ethernet adapter:
a) Windows Control Panel > Network and Dial-up Connections
b) Right-click
“Local Area Connection,” select Properties, and then select the
Sharing tab.
c) Clear (uncheck) the box for
“Enable Internet Connection Sharing for this
connection
” and click OK.
2. Re-enable Sharing for the Ethernet adapter; repeat Step 1.c.), and select (check)
the sharing box.
If offered an option to select an adapter, select
“Bluetooth network adapter.” (This
option will not appear unless more than one adapter is available.)
If asked to reboot the computer, do so.
7.9 TEST A NETWORK ACCESS CONNECTION
If the client is hardwired to the LAN, unplug the hardwired connection to ensure that
the test checks the wireless connection rather than the hardwired connection.
If the server has access to the Internet, open a browser on the client and connect to
the World Wide Web.
You may also Ping the server from the DOS prompt.
7.10 UNKNOWN PORT MESSAGE WHEN USING A
BLUETOOTH SERIAL PORT
The “Unknown Port” error message usually means an attempt was made to connect a
port that was in use.