Pioneer DVR-320-S - Manual (Page 14)

Connecting up 02
14
En
Using other types of video output
This recorder has standard (composite), S-video and component video outputs. The main difference between them is
the quality of the picture. S-video delivers a better picture than composite video, while component video gives better
picture quality still. The variety of outputs also gives you the flexibility of connecting your particular equipment using
the best connection type available.
1 Connecting using an S-video output
S-video carries the picture as separate color and
luminance (brightness) signals.
There are two S-video outputs for connection to TVs,
monitors, VCRs or other equipment.
• Use an S-video cable (not supplied) to connect an
S-VIDEO OUTPUT (1 or 2) to an S-video input on your
TV, monitor (or other equipment).
2 Connecting using the component video output
Component video carries the picture as two separate
color signals, plus a luminance (brightness) signal.
See also Component Video Out on page 78 for how to set
up the component video output for use with a progressive
scan-compatible TV.
• Use a component video cable (not supplied) to
connect the COMPONENT VIDEO OUT jacks to a
component video input on your TV, monitor (or
other equipment).
TV
COMPONENT VIDEO OUT DIGITAL OUT
AC IN
OPTICAL
CONTROL
IN Y P B P R
IN OUT
VHF/UHF
INPUT 1/ AUTO START REC
R L
AUDIO VIDEO S-VIDEO
R L
AUDIO VIDEO S-VIDEO OUTPUT 2
OUTPUT 1
INPUT 3
S-VIDEO
INPUT
COMPONENT
INPUT
1 2
RL_s Singapore.book 14 ページ ２００４年４月２３日 金曜日 午後８時１１分