Pioneer DVR-320-S - Manual (Page 6)

Before you start 01
6
En
Chapter 1
Before you start
Features
• Chase play
Using chase play you can start watching a recording
before the recording has finished. For example, you could
set a timer recording for a program that you’re going to
miss the first 15 minutes of, then start watching while the
recorder is still recording the program 15 minutes ahead
of you.
• Simultaneous recording and playback
This feature allows you to record a broadcast program
while watching something else already recorded on the
same disc.
• Disc Navigator
The on-screen Disc Navigator makes finding your way
around the contents of a disc easy. For recordable DVD
content, moving thumbnail images are displayed for
ease of use. The Disc Navigator is also where you can edit
recordable DVD content.
• Disc History
The Disc History screen shows disc information,
including how much free space remains for recording,
for the last 30 recordable discs loaded in the recorder.
Every time you load a recordable disc, the Disc History is
automatically updated with the latest information.
• Home Menu
The Home Menu gives you on-screen access to all the
recorder’s features in one convenient place, from setting
up the recorder, to programming a timer recording and
editing a recording.
• Progressive scan-compatible
Compared to standard interlaced video, progressive scan
effectively doubles the amount of video information fed to
your TV or monitor. The result is a stable, flicker-free
image. (Check your TV/monitor for compatibility with this
feature.)
• Cinema surround sound in your home
Connect this recorder to a Dolby Digital and/or DTS-
compatible AV amp/receiver to enjoy full surround sound
effects from Dolby Digital and DTS DVD discs.
• Easy Timer Recording
Setting the recorder to record a program is simple from
the Easy Timer Recording screen. Set the channel to
record and the recording quality, then graphically set the
start and end times of the recording. That’s it!
• Program up to 32 timer recordings
You can program the recorder to record up to 32
programs, up to a month in advance, using the
G-Code™ system
*
for easy programming if you want. As
well as single programs, you can specify daily or weekly
recordings, too.
* G-Code is registered in at least the following
countries: Australia, China, Hong Kong, Japan, New
Zealand, South Korea, Taiwan and Singapore.
The G-Code system is manufactured under license
from Gemstar Development Corporation.
• One Touch Recording
Use One Touch Recording to start recording immediately
in 30 minute blocks. Each time you press the
ì REC
button, the recording time is extended by another 30
minutes.
• Optimized recording
Optimized recording adjusts the recording quality
automatically if a timer recording will not fit onto a disc
with the settings that you made.
• Auto Start Recording from satellite receiver or
other set top box
With a satellite receiver or other set top box connected to
the
INPUT 1/AUTO START REC inputs of this recorder,
you can start and stop recording automatically according
to the timer settings of the set top box.
• High quality 16-bit Linear PCM audio
When recording using one of the high quality record
settings (
FINE or MN32 ), the audio is recorded in
uncompressed 16-bit Linear PCM format. This delivers
great sounding audio to accompany the high picture
quality.
• Picture quality adjustment features
During playback, you can adjust various picture quality
settings to improve the picture. You can also adjust the
recording picture quality. For example, if you want to
make a DVD copy of an old video tape, you can optimize
the picture quality before transferring it to disc.
• Find what you want to watch quickly and easily
Unlike video tape that needs to be wound to the correct
place, you can jump right to the part of a DVD disc that
you want to watch. Search for a point on a disc by title,
chapter or time.
VR mode
VR mode
RL_s Singapore.book 6 ページ ２００４年４月２３日 金曜日 午後８時１１分