Pioneer DVR-320-S - Manual (Page 77)

The Initial Setup menu 12
77
En
2 Select ‘Next Screen’ to go to the swap presets
screen.
3 Use the / (cursor up/down) buttons to select
a preset station to swap.
• Use the PREV/NEXT buttons to display the previous/
next page.
4 Press (cursor right), then select a preset
station to swap with the first preset.
5 Press ENTER to swap the presets.
6 If you want to swap more presets, press
(cursor left), then repeats steps 3 to 5.
7 Press HOME MENU to finish and exit.
G-Code CH Setting
• Default setting: n/a
Guide channels are used by the G-Code system so that
the channel number specified in the G-Code
programming numbers can be guaranteed to
correspond to the correct station.
1 Select ‘G-Code CH Setting’, then ‘Next Screen’.
2 Assign channel numbers to the guide channels as
necessary.
Look in your TV guide to see which channel numbers
should be assigned to which guide channels.
• Use the
/
(cursor up/down) buttons to change
the guide channel for setting.
• Use the / (cursor left/right) buttons to change
the channel number.
• Use the PREV / NEXT button to display the previous/
next 10 guide channels.
3 To return to the Initial Setup menu, press ENTER.
Video In / Out settings
Input Colour System
• Default setting: Auto
On the default setting, the recorder automatically detects
whether the video signal from the built-in tuner or from
one of the external inputs is PAL, SECAM, 3.58 NTSC or
PAL–60. You may, however, occasionally need to set it
manually if the picture is not displayed properly.
1 1
Pr System CH Name
1 B/G CC40
2
B/G 2
3 B/G 3
4 B/G 4
5 B/G 5
6 B/G 6
Pr System CH Name
1 B/G CC40
2
B/G 2
3 B/G 3
4 B/G 4
5 B/G 5
6 B/G 6
[1] 1/17 [2] 1/17
Swap Preset
Initial Setup
5 1
Pr System CH Name
1 B/G CC40
2
B/G 2
3 B/G 3
4 B/G 4
5 B/G 5
6 B/G 6
Pr System CH Name
1 B/G CC40
2
B/G 2
3 B/G 3
4 B/G 4
5 B/G 5
6 B/G 6
[1] 1/17 [2] 1/17
Swap Preset
Initial Setup
5 3
Pr System CH Name
1 B/G CC40
2
B/G 2
3 B/G 3
4 B/G 4
5 B/G 5
6 B/G 6
Pr System CH Name
1 B/G CC40
2
B/G 2
3 B/G 3
4 B/G 4
5 B/G 5
6 B/G 6
[1] 1/17 [2] 1/17
Swap Preset
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Auto Channel Setting
Manual CH Setting
Channel Swapping
G-Code CH Setting Next Screen
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Auto Channel Setting
Manual CH Setting
Channel Swapping
G-Code CH Setting
G-Code CH Setting
G-Code CH Setting
Guide Preset Guide Preset
1/26
1
2
3
4
5 6
7
8
9
10
Pr 4
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Input Colour System
Component Video
NTSC on PAL TV Next Screen
Initial Setup
RL_s Singapore.book 77 ページ ２００４年４月２３日 金曜日 午後８時１１分