Audio in settings, Audio out settings, The initial setup menu 12 – Pioneer DVR-320-S User Manual

Page 79

Advertising

The Initial Setup menu

Audio In settings

NICAM Select

• Default setting:

NICAM

If you want to record the non-NICAM audio in a TV
broadcast, select

Regular Audio

, otherwise set to

NICAM

. (When set to

NICAM

, you can still select

Regular Audio

using the

AUDIO

button. See

Changing

audio channels

on page 27.)

Tuner Level

• Default setting:

Normal

Set to

Compression

if the audio level from the built-in

tuner is excessively high causing distortion.

External Audio

• Default setting:

Stereo

If the external source is standard stereo, leave set to

Stereo

. If each channel carries a separate soundtrack,

change to

Bilingual

Bilingual Recording

• Default setting:

A/L

When recording a bilingual source from an external input
in Video mode or VR mode set to

FINE/MN32

, you can

choose to record either the

A/L

(left), or the

B/R

(right)

audio channel.

Note

• If you’re recording in VR mode (except when set to

FINE/MN32

), both channels will be recorded and you

can switch them as you like on playback.

Input Level (L1 / L2 / L3)

• Default setting:

0dB

You can adjust the gain of the audio from each external
input individually, from

–6dB

+6dB

in steps of 3 dB to

optimize the recorded audio level.

Audio Out settings

Digital Out

• Default setting:

If at any time you need to switch off the digital audio
output, set this to

Off

, otherwise leave it