Plextor CONVERTX PX-M402U - Manual (Page 21)

Section 2. Installing Your ConvertX
Plextor ConvertX PX-M402U Installation and Users Manual 15
Turning the ConvertX On and Off
Note that there’s no power switch on the ConvertX. When the computer
power is on, the ConvertX is on. When the computer power is off, the
ConvertX is off.
Don’t Forget to Register!
Don’t forget to register your ConvertX! In the Plextor Application
Installer, select Register Your ConvertX and follow the prompts.
Registration means you’ll stay abreast of valuable information about
new features, updated drivers, and more.
If the Installation Failed
If the ConvertX installation failed, check for these causes:
• Make sure you are using Windows 2000 or Windows XP. The
ConvertX won’t work with Windows 95, 98, 98SE, or Windows Me.
You need to upgrade your computer’s operating system to Windows
2000 or Windows XP.
• Launch the installation manually: If you have to launch the
installation manually, look on the Plextor CD and double-click the
Plextor ConvertX PX-M402U.exe file.
• Make sure the ConvertX is recognized. See “Make Sure the
ConvertX Is Recognized” below.
• Troubleshoot other devices. (See “Troubleshoot Other Devices” on
page 17.
Make Sure the ConvertX Is Recognized
After installation, you may want to make sure the ConvertX is
recognized by your computer. To check whether it is recognized:
To see if the ConvertX is recognized in Windows:
1. In Windows XP or 2000, go to Start | Settings | Control Panel.
2. In Control Panel, double-click the System icon. You see the System
Properties window.