Plextor CONVERTX PX-M402U - Manual (Page 23)

Section 2. Installing Your ConvertX
Plextor ConvertX PX-M402U Installation and Users Manual 17
7. If the ConvertX does not operate even though 1) the sound, audio
and game controllers are listed and do not have a yellow diamond
with an exclamation point, and 2) the Plextor ConvertX device is
listed, in Device Manager double-click the Plextor ConvertX device
and then select the Remove button. Then restart your computer. The
computer will automatically perform another hardware scan and this
time it should install the digital video converter correctly.
Troubleshoot Other Devices
• In the Device Manager, if any of your entries for Other devices have
a yellow diamond with an exclamation point (!), troubleshoot your
Plextor ConvertX device for compatibility problems or other
conflicts. It may just be a matter of obtaining the latest USB driver
or Windows 2000 or Windows XP Service Pack from Microsoft’s
Windows Update.
• To update the PX-M402U driver, right-click on the question mark
and select Properties, then select the Driver tab and click Update
driver. Look for the device driver on the Plextor CD.
Changing to Another Computer
Your ConvertX does not have firmware. It downloads its operating
program from your computer each time you turn the computer on or
reconnect the ConvertX.
Before using your ConvertX on a different computer, use the ConvertX
installation CD and install the ConvertX drivers on that computer.
Connect the Video Input to the ConvertX
Connect the analog video source to the ConvertX input connectors.
Figure 12 shows some of the sources you can use.