Configuring ip filter rules – Paradyne 8510 User Manual
Page 68
Advertising
3. DSL Card Configuration
3-32
April 2001
8000-A2-GB26-50
Configuring IP Filter Rules
Procedure
Configure IP Filters and associated rules in the following sequence:
1. Define each filter using the IP Filters screen (A-G-A).
The following is an example of an IP Filter Table.
— An inbound filter acts on packets in the upstream direction from the client
to the NSP server.
— An outbound filter acts on packets in the downstream direction from the
NSP server to the client.
2. Enter 0 (zero) to add a new filter. The IP Filter Configuration screen appears.
Advertising