Paradyne 8510 - Manual (Page 95)

4. Monitoring the Hotwire DSL System
8000-A2-GB26-50 April 2001 4-21
DSL Monitoring Filters Screens
Use the Filters screens to display configured IP and Ethertype filter information.
Procedure
1. Follow this menu selection sequence:
Monitoring
→
Filters (B-G)
2. The Filters menu appears. Select the option as shown in Table 4-6, Filters .
Table 4-6. Filters (1 of 2)
IP Filter Table (B-F-A)
The IP Filter Table screen displays the status of the IP filter.
Item # – Enter the item to display.
Filter Name – Name of the IP filter.
# Rules – Number of rules in filter.
Def. Filter Action – Forward/discard.
VNID – Interface and VNID to which the filter belongs.
Interface – DSL interface to which the filter belongs (for example, dsl1:1 through dsl12:1
for 12-port cards).
Filter Status – Active/Inactive.
Direction – Inbound/Outbound.
NOTE: To view the filter rules, you must have Administrator level access and use the
Configuration Menu (A-G-A). Refer to
Table 3-6, Filters Options , in Chapter 3, DSL
Card Configuration.