Paradyne 8510 User Manual
Page 94
4. Monitoring the Hotwire DSL System
4-20
April 2001
8000-A2-GB26-50
Table 4-5.
Service Node Options
SN Information
B-E
Displays Service Node information.
NOTE: Although the System Name, System Contact and System Location can be
entered on the SN Configuration screen (A-F), DSL Router SNs use and display the
SNMP information set via the System Group.
Interface Name – Enter the DSL or MVL port name (for example, dsl1:1 through dsl12:1
for 12-port cards, etc.).
SN Type – Model number of endpoint as entered on the DSL Ports screen (A-B-B).
System Name – 16 alphanumeric characters. Name assigned to the endpoint.
System Contact – 32 alphanumeric characters. Name or number of the person
responsible for the endpoint.
System Location – 16 alphanumeric characters. Physical location of the system.
System Circuit ID – Location of the circuit.
Model Num – Model number of the endpoint.
Serial Num – Serial number of the endpoint.
Firmware Rev – Version of firmware.
Hardware Rev – Version of hardware.
DSP Rev – (For Models 8510, 8312/8314 ReachDSL/MVL, 8343/8344, and 8373/8374
only.) Version of DSP chipset.
IUT Revision – (For Models 8303/8304 only.) Version of the ISDN U-Interface
Transceiver (IUT).
MVL Rev – (For Models 8310/8312/8314 MVL only.) Version of MVL chipset.