Paradyne 8510 - Manual (Page 31)

2. Hotwire Menus and Screens
8000-A2-GB26-50 April 2001 2-11
DSL Card Configuration Menu
The following figure illustrates the complete Configuration menu hierarchy from the
Hotwire – DSL menu.
NOTE:
The Configuration menu and its submenus appear only when logging in to the
system with a user account that has Administrator permission.
Use care when entering configuration information, since the system will react
based on the values you enter. Entering configuration information may result in
adding data in the MIB II Systems Group.
01-15899-06
(A) Configuration
A. Card
B. Ports
C. Interfaces
D. Users
E. Bridge
F. SN Configuration
G. Filters
(F) Download Code
A. Download Code
B. Apply Download
(C) Interfaces
A. General
B. Control
(B) Ports
A. Ethernet Port 1
B. DSL Ports
(A) Card
A. Card Info
B. Time/Date
C. NVRAM Clear
D. NVRAM Cfg Loader
E. Card Reset
F. Download Code
(G) Filters
A. IP Filters
B. Ethertype
Filters
(D) Users
Function Not
Supported
(E) Bridge
A. General
B. Card VNID Table
C. VNID Binding Table
D. Client Allocation
E. Client VNID Table
F. ARP Table
(F) ARP
A. Parameters
B. ARP Entry
(F) SN Configuration
1 DSL Card with Ethernet Network Interface only