Paradyne 8510 - Manual (Page 32)

2. Hotwire Menus and Screens
2-12 April 2001 8000-A2-GB26-50
DSL Card Monitoring Menu
The following figure illustrates the complete Monitoring menu hierarchy from the
Hotwire – DSL menu.
Logging In to the System
This section describes how to log in to the Hotwire DSL system after the system
has been configured. For information on accessing the system for the first time,
see the
Hotwire Management Communications Controller (MCC) Card, IP
Conservative, User’s Guide .
NOTE:
When you power on the system for the first time, the system displays the Who
Am I screen. This screen can be accessed only from the local console.
(A) Card
A. Card Info
B. Login History
C. Syslog
(B) Physical Layer
A. Active List
B. Ethernet Stats
1
B. SAR Stats 2
C. EtherHDLC Stats
D. DSL Link Perf
E. DSL Perf Stats
F. DSL Error Stats
G. DSL Xmit Stats
(C) Interfaces
A. Active List
B. Status
(E) Bridge
A. Card VNID Table
B. MAC Table
C. VNID Binding Table
D. Client Allocation
E. Client VNID Table
F. ARP Table
01-15900-08
(B) Monitoring
A. Card
B. Physical Layer
C. Interfaces
D. Network Protocol
E. Bridge
F. SN Information
G. Filters
(F) SN Information (G) Filters
A. IP Filters
B. Ethertype
Filters
1 DSL Card with Ethernet Network Interface only
2 DSL Card with ATM Network Interface only