Paradyne 8510 - Manual (Page 33)

2. Hotwire Menus and Screens
8000-A2-GB26-50 April 2001 2-13
Accessing a Selection Screen
Procedure
To access one of the selection screens:
1. From the Hotwire Chassis Main Menu, select one of the following:
— A for Quick Card Select
— B for Port Card Select
— C for Mgmt. Card Select
— D for Managed SN Select
The desired selection screen appears.
2. At the Goto: prompt, type the slot number of the desired card. Or, type the
slot and port number of the desired SN.
The appropriate menu appears. For Management card menu information, see
the
Hotwire Management Communications Controller (MCC) Card, IP
Conservative, User’s Guide . For SN menu information, see the Hotwire DSL
Routers User’s Guide.
The following is an example of the Port Card Select screen.
NOTE:
If an option is not active, an underscore appears in its place.