Paradyne 8510 - Manual (Page 78)

4. Monitoring the Hotwire DSL System
4-4 April 2001 8000-A2-GB26-50
SYSLOG Screen Example
DSL Monitoring Physical Layer Screens
Use the Physical Layer screens to display read-only system information about
physical ports. The port cards with an ATM Network Interface allow you to select
SAR statistics (B. SAR Stats) rather than Ethernet statistics.
Procedure
To view the active ports list, Ethernet or SAR statistics, and HDLC bus statistics:
1. Follow this menu selection sequence:
Monitoring
→
Physical Layer (B-B)
2. The Physical Layer menu appears. Select the submenu option as shown in
Table 4-2, Physical Layer Options , and press Enter.