Pcm interface, Initiating pcm, Pcm interface -88 – Polycom DOC2560C User Manual
Page 166: Initiating pcm -88
Advertising
Chapter 3-Basic Operation
3-88
The default value of the Permission field is Everyone. It can be
modified to Chairperson.
PCM Interface
Initiating PCM
For IP endpoints: PCM is activated by pressing the Far key (
)
followed by any of the Arrow Keys on the Remote Control Device.
For ISDN/PSTN endpoints: PCM is activated by pressing ## on the
Remote Control Device.
Everyone /Chairperson
Default DTMF Code ‘##”
Advertising