Polycom DOC2560C - Manual (Page 176)

Chapter 3-Basic Operation
3-98
Camera Control
This function is not available to chairpersons using PCM with ISDN
endpoints.
The endpoint to be controlled must support Far End Camera Control
(FECC).
Using the arrow keys of the remote control device, the chairperson can
control the direction, zoom and focus of a remote endpoint’s camera.
To control a far camera:
1
Use the Up/Down arrow keys to select Camera Control in the Main
Menu and then press the Right arrow or # key to confirm your
selection.
or
Press the 4 key on the Remote Device.
The Camera Control sub menu is displayed.
2 Use the Up/Down/Left/Right arrow keys to select the far camera to
be controlled.
A colored frame is displayed around the selected cell in the video
layout.
3 Use the Zoom In key to activate FECC.