Polycom DOC2560C - Manual (Page 177)

Polycom RMX 1500/2000/4000 Getting Started Guide
3-99
Following a 10 second delay, the FECC active icon ( ) is displayed
in the video image of the selected site.
4 Use the Up/Down/Left/Right/Zoom In/Zoom Out arrow keys to
control the remote camera.
5 Press the 0 key on the remote control to exit FECC.
6 Use the Zoom Out key on the remote control to return to the
conference video.
Video Force
This function is not available to chairpersons using PCM with ISDN
endpoints.
Video Force enables the chairperson to force the video of a specific
participant to a specific window of the video layout.
To Video Force a participant’s video:
1
Use the Up/Down arrow keys to select Video Force in the Main Menu
and then press the Right arrow or # key to confirm your selection.
or
Press the 5 key on the Remote Device.
Selected Cell for
Far End
Camera Control