Precor Cardio Theater Integrated Bracket Assembly Instructions EFX LCD - Manual (Page 12)

Cardio Theater Integrated Bracket Assembly Instructions
page 12
19. Secure the upright support by replacing the four
fasteners set aside in step 5.
20. Retighten the two handrail clamp screws.
Important: Look underneath the handrail clamp
at the gap between the handrails. The area
between the ends of the handrails should be no
larger than a ¼-inch gap. If necessary, push the
handrails toward each other before tightening
the screws.
21. Replace the back cover and rubber grommet.
Replace the back cover onto the upright
support. Fit the lip of the back cover into the
tabs along the inside surface of the grommet.
Apply pressure to the top of the back cover
while you tighten the screws.
Rubber
grommet
Upright
support
19
Handrail
Handrail clamp
Display
console
20
21
Slide rubber grommet
down so it fits snugly
against the back cover.
Preparing the EFX546i
Back
cover
Upright
support
Back
cover