Precor Cardio Theater Integrated Bracket Assembly Instructions EFX LCD - Manual (Page 8)

Cardio Theater Integrated Bracket Assembly Instructions
page 8
5. Remove the four fasteners securing the upright
support.
Use a ¼-inch hex and ½-inch box end wrench to
remove the fasteners. Keep the fasteners
together and within easy reach.
Important: Ask someone for help before
completing the next step.
6. Separate the display console from its bracket.
Ask your assistant to hold the display console
while you remove the four screws from the back
of the display console bracket using a
⁵⁄₃₂-inch
hex key. If the display console slides off the
display console bracket, its weight can place
excessive pressure on the data cable.
7. Remove the plastic plug.
Use your thumbs to pop the plastic plug from
the display console bracket. Discard the plug.
Note: If no plug exists in the display console,
you will need to drill a hole using a
⁷⁄₈-inch drill
bit and electric drill.
Preparing the EFX546i
Rubber
grommet
Upright
support
Display
console
bracket
Assistant must hold onto
the display console to
keep it from sliding.
5
7
6
Plastic
plug
Display
console
bracket
Display
console