Precor Cardio Theater Integrated Bracket Assembly Instructions EFX LCD - Manual (Page 15)

Cardio Theater Integrated Bracket Assembly Instructions
page 15
Important: Ask someone for help before
completing the next step.
5. Remove the four fasteners securing the upright
support.
Ask your assistant to hold the upper support
while you use a ¼-inch hex and ½-inch box
end wrench to remove the four fasteners that
secure the upright support. Keep the fasteners
together and within easy reach.
Important: A data cable runs the length of the
upright support. Do not separate the upper
support from the lower support until you have
disconnected the cable in the next step.
6. Disconnect the data cable.
Ask your assistant to gently lift the upper
support to expose a gap between the upper
and lower supports. Access the data cable and
disconnect it.
7. Lay the upper support and display console on
a clean work surface.
8. Separate the display console from its bracket.
Remove the four screws from the back of the
display console bracket using a
⁵⁄₃₂-inch hex
key. Secure the display console so its weight
does not place excessive pressure on the data
cable.
9. Remove the plastic plug.
Use your thumbs to pop the plastic plug from
the display console bracket. Discard the plug.
Rubber
grommet
Upright
support
5 6
8
Preparing the EFX556i
Data
cable
Upper
support
Display
console
Display
console
bracket
9
Display
console
bracket Plastic
plug
Lower
support