Precor Cardio Theater Integrated Bracket Assembly Instructions EFX LCD - Manual (Page 5)

Cardio Theater Integrated Bracket Assembly Instructions
page 5
Preparations
2
Important: To attach the Cardio Theater Integrated
Bracket, ask another adult for help. Do not attempt
the assembly by yourself.
Remember to read and follow the instructions in this
guide. If you do not assemble the Cardio Theater
Integrated Bracket according to these guidelines,
you could void the Precor Limited Warranty.
Required Tools
Obtain these tools before assembly:
• Standard hex key set
• Standard socket set
• ½-inch box wrench or crescent wrench
• Flat head screwdriver
• Phillips-head screwdriver
• Power drill with a ⁷⁄₈-inch drill bit
• Standard torque wrench
Installation Requirements
Review these installation requirements before
assembly:
• The Cardio Theater Integrated Bracket is
built to VESA MIS-D, 100/75 standard interface
specifications.
• Provide ample space around the EFX. Open
space around the unit allows for easier access
and installation.
• Open the box and assemble components
in the sequence presented in this guide.
• Leave room for adjustments. Tighten fasteners
(bolts, nuts, and screws) so the unit is stable, but
leave room for adjustments. Do not fully tighten
fasteners until instructed in the assembly steps
to do so.
Assembly Tips
• Read all the notes on each page before com-
pleting that step.
• While you may be able to assemble the Cardio
Theater Integrated Bracket using the illustra-
tions only, important safety notes and other tips
are included in the text.
• Refer to the EFX owner’s manual for torque
wrench specifications. The handrail clamp and
upright support fasteners are not fully secure
until tightened using a torque wrench.
The assembly of the Cardio Theater Integrated
Bracket takes about ½ hour to complete.
Preparations